Front Hub Unit Bearing: Disassembly

WARNING: This page is about a different car, the 2014 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.

Using the ST or a hydraulic press, push out the bolt - hub (b) from the hub unit COMPL - front axle (a).

CAUTION:

Be careful not to hammer the bolts - hub. This may deform the hub unit COMPL.
Do not reuse the bolt - hub.

PREPARATION TOOL:

ST: HUB STAND (28399AG000)

Fig 1: Pushing Out Bolt Of Hub - Front Axle

Courtesy of SUBARU OF AMERICA, INC.

NOTE: Since the hub unit COMPL can not be disassembled, only bolts - hub can be removed.