Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Subaru >> 2014 >> BRZ Premium >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Automatic Transaxle (Service Information)) >> Select Lever >> Unit Inspection

Unit Inspection

WARNING: This page is about a different variant/trim than selected.
  1. Check of select lever ASSY
    1. Measure the resistance between the terminals.
      RESISTANCE

      Inspection terminals Inspection conditions (shift position) Standard value
      1 - 3 Select lever in any other than P position Less than 1 Ω
      2 - 3 Select lever in P position
      8 - 9 When select lever is in M position and shifted to "+"
      10 - 11 Select lever in M position
      12 - 13 When select lever is in M position and shifted to "-"
      1 - 3 Select lever in P position 10 k Ωor more
      2 - 3 Select lever in any other than P position
      8 - 9 Except when select lever is in M position and shifted to "+"
      10 - 11 Select lever in any other than M position
      12 - 13 Except when select lever is in M position and shifted to "-"
      Fig 1: Select Lever Assy Terminals Layout
      G08554478Courtesy of SUBARU OF AMERICA, INC.
  2. Check of shift lock solenoid ASSY
    1. Measure the resistance between the terminals.
      RESISTANCE

      Inspection terminals Inspection conditions Standard value
      4 - 5 20°C 27.6 to 30.5 Ω
      Fig 2: Shift Lock Solenoid Assy Terminals Layout
      G08554479Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About Mike's Workshop Manuals