Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Subaru >> 2014 >> BRZ Limited, Automatic Trans >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Seat Belt System >> Child Seat Restraining Device (ISO-FIX) >> Installation

Child Seat Restraining Device (ISO-FIX): Installation

  1. Installation of the child restraint seat tether anchor bracket
    1. Insert the guide and temporally install the child restraint seat tether anchor bracket.
    2. Install the child restraint seat tether anchor bracket with the bolt.

      Standard value: T=25N.m {255kgf.cm} {18.4ft.lbf}

      NOTE: Install the both brackets by following the same procedures.
  2. Installation of package tray trim panel assembly (Refer to INSTALLATION )
  3. Installation of the rear window side garnish RH (Refer to INSTALLATION )
  4. Installation of rear window side garnish LH
    NOTE: Install the part in the same manner as RH side.
  5. Installation of the quarter trim lid RH (Refer to INSTALLATION )
  6. Installation of quarter trim lid LH
    NOTE: Install the part in the same manner as RH side.
  7. Installation of the quarter lower trim RH (Refer to INSTALLATION )
  8. Installation of quarter lower trim LH
    NOTE: Install the part in the same manner as RH side.
  9. Installation of front door opening trim weather strip RH
  10. Installation of front door opening trim weather strip LH
  11. Installation of the front door scuff plate RH (Refer to INSTALLATION )
  12. Installation of front door scuff plate LH
    NOTE: Install the part in the same manner as RH side.
  13. Installation of the bench type rear seat backrest assembly (Refer to INSTALLATION )
  14. Installation of separate type rear seat cushion assembly (Refer to INSTALLATION )
  15. Installation of the separate type rear seat cushion assembly LH
scientia non olet · About Mike's Workshop Manuals