Monitor Description
If the vehicle speed signal sent from the skid control ECM exceeds 300 km/h {186.42 MPH}, the ECM judges it as a failure in the vehicle speed signal circuit, turns on the MIL, and records the DTC.
MONITOR STRATEGY
| Related DTCs | P0500: Vehicle speed sensor (VSS) range check |
| Required Sensors/Components (Main) | Speed sensor (VSS) Combination meter Skid control ECM |
| Required Sensors/Components (Related) | - |
| Frequency of Operation | Continuous |
| Duration | 2.5 seconds |
| MIL Operation | Immediately after |
| Sequence of Operation | None |
TYPICAL ENABLING CONDITIONS
| Overlap prohibited DTC | U0073, U0122, U0416 (CAN system) |
| Battery Voltage | 10.9V or more |
| Elapsed time after starting the engine | 2 seconds |
TYPICAL MALFUNCTION THRESHOLDS
| Vehicle speed | 300km/h {186.42 MPH} or more |