Inspection steps
- SSM3 data reading
- Using SSM3, follow the screen and read [Current Data Display]. (Refer to DISPLAY OF CURRENT DATA/SYSTEM OPERATION CHECK MODE
)
Criteria: The normal value of [Current Data Display] is displayed properly.
SSM3 DISPLAY: [EACH SYSTEM CHECK] →[POWER WINDOW] →[CURRENT DATA DISPLAY.SAVE]Item Name Description/display range Normal value Remarks [Drivers seat AUTO SW state] Operation signal of switch AUTO for the driver's seat/Display range: OFF - ON [ON]: AUTO switch is in operation.
[OFF]: Neutral- NG: Go to Step 3.
OK: Go to Next Step
- Using SSM3, follow the screen and read [Current Data Display]. (Refer to DISPLAY OF CURRENT DATA/SYSTEM OPERATION CHECK MODE
)
- Perform initialization operation.
- Initialize the power window regulator master switch assembly RH (driver's seat). (Refer to REGISTRATION SETTINGS )
- Open and close the power window, and ensure it works properly.
Criteria: It operates properly.
NG: Replacement of the power window regulator motor assembly RH (driver's seat) (Refer to REMOVAL )
OK: Complete (due to failed initialization)
- Replacement of the power window regulator master switch assembly
- Replace with the new or normal power window regulator master switch assembly, and verify normal operation. (Refer to POWER WINDOW REGULATOR MASTER SWITCH assembly
)RESULT
Item Go to Motor operates. A Motor does not operate. B B: Replacement of the power window regulator motor assembly RH (driver's seat) (Refer to REMOVAL )
A: Complete (power window regulator master switch assembly is failed)
- Replace with the new or normal power window regulator master switch assembly, and verify normal operation. (Refer to POWER WINDOW REGULATOR MASTER SWITCH assembly
)