Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Subaru >> 2013 >> Tribeca >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> LAN Communication System (Diagnostics) >> Subaru Select Monitor >> Operation >> Clear Memory Mode

Clear Memory Mode

  1. On «Main Menu» display, select {Each System Check}.
  2. On «System Selection Menu» display, select {Integ. unit mode}.
  3. Select the [OK] after the information of body integrated unit type is displayed.
  4. On «Integ. unit mode failure diag» display, select {Clear Memory}.
    Display Contents to be displayed
    Clear Memory? Clear function of DTC and freeze frame data
  5. When "Done" is shown on the display screen, turn the ignition switch to OFF.
    NOTE: For details concerning the operation procedure, refer to "PC application help for Subaru Select Monitor".
scientia non olet · About Mike's Workshop Manuals