Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Subaru >> 2013 >> Outback R >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 7 (Engine Intake System (Induction) (H4DO)) >> Air Intake Boot >> Removal

Air Intake Boot: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Remove the clip (A) from the air intake boot.
  2. Loosen the clamp (B) connecting the air intake boot and air cleaner case (rear).
  3. Loosen the clamp (C) which connects the air intake boot and throttle body.
    Fig 1: Identifying Air Intake Boot Clip And Clamp
    G08579606Courtesy of SUBARU OF AMERICA, INC.
  4. Disconnect the PCV hose and remove the air intake boot.
scientia non olet · About Mike's Workshop Manuals