Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Subaru >> 2013 >> Outback Base, Standard Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 9 (Continuously Variable Transaxle (CVT)) >> Transfer Clutch >> Removal

Transfer Clutch: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Remove the transmission assembly from the vehicle. Refer to REMOVAL .
  2. Remove the extension case. Refer to REMOVAL .
  3. Remove the transfer clutch assembly.
    Fig 1: Identifying Transfer Clutch Assembly
    G08578798Courtesy of SUBARU OF AMERICA, INC.
  4. Remove the thrust bearing.
    Fig 2: Identifying Thrust Bearing
    G08317899Courtesy of SUBARU OF AMERICA, INC.
  5. Remove the seal ring from transfer clutch assembly.
    Fig 3: Locating Transfer Clutch Assembly Seal Rings
    G08317900Courtesy of SUBARU OF AMERICA, INC.
  6. Remove the seal ring from the transfer driven gear assembly.
    Fig 4: Locating Transfer Driven Gear Assembly Seal Ring
    G08317901Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About Mike's Workshop Manuals