Check Power Seat Switch

• Without memory function 

Measure resistance between terminals while operating each switch.

Fig 1: Measuring Resistance Between Power Seat Switch Terminals (Without Memory Function)

• Driver's seat

  Switch position	Terminal No.	Standard
  Slide forward	7 and 14 8 and 13	Less than 10 Ω
  Slide rearward	7 and 13 8 and 14	Less than 10 Ω
  Tilt up	7 and 2 8 and 1	Less than 10 Ω
  Tilt down	7 and 1 8 and 2	Less than 10 Ω
  Lifter up	7 and 5 8 and 6	Less than 10 Ω
  Lifter down	7 and 6 8 and 5	Less than 10 Ω
  Reclining forward	7 and 3 8 and 4	Less than 10 Ω
  Reclining rearward	7 and 4 8 and 3	Less than 10 Ω

• Passenger's seat

  Switch position	Terminal No.	Standard
  Slide forward	7 and 13 8 and 14	Less than 10 Ω
  Slide rearward	7 and 14 8 and 13	Less than 10 Ω
  Reclining forward	7 and 4 8 and 3	Less than 10 Ω
  Reclining rearward	7 and 3 8 and 4	Less than 10 Ω

  Replace the power seat switch if the inspection result is not within the standard value.

• With memory function 

  Measure resistance between terminals while operating each switch.

  Fig 2: Measuring Resistance Between Power Seat Switch Terminals (With Memory Function)

  

Replace the power seat switch if the inspection result is not within the standard value.