Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Subaru >> 2013 >> Forester X, Automatic Trans >> Repair and Diagnosis >> Maintenance >> Procedures >> General Information >> Pre-delivery Inspection >> Pre-Delivery Inspection (PDI) Procedure >> Immobilizer System

Immobilizer System

  1. Check that the engine starts with all keys that are equipped on vehicle.
  2. 60 seconds after turning ignition switch from ON to ACC or OFF, or immediately after removing the key, check that the security indicator light is blinking.
NOTE: If malfunctions occur, refer to "IMMOBILIZER (DIAGNOSIS)". < Refer to BASIC DIAGNOSTIC PROCEDURE . >
scientia non olet · About Mike's Workshop Manuals