Starting System & Charging System (H4DO): Starter: Installation

Install in the reverse order of removal.

NOTE: For the AT model, a nut is used at (A).

Tightening torque:

50 N.m (5.1 kgf-m, 36.9 ft-lb)

Fig 1: Identifying Starter Mounting Nuts

Courtesy of SUBARU OF AMERICA, INC.

Tightening torque:

10 N.m (1.0 kgf-m, 7.4 ft-lb)

Fig 2: Locating Starter Mounting Nut

Courtesy of SUBARU OF AMERICA, INC.

Tightening torque:

3 N.m (0.3 kgf-m, 2.2 ft-lb)

Fig 3: Locating Hose Clamp

Courtesy of SUBARU OF AMERICA, INC.