Read Diagnostic Trouble Code (DTC): Operation
- On «Main Menu» display, select {Each System Check}.
- On «System Selection Menu» display, select {Brake Control System}.
- Click the [OK] button after the {VDC} is displayed.
- On «Brake Control Diagnosis» display, select {Diagnostic Code(s) Display}.
- Record the DTC and data.NOTE:
- For detailed operation procedures, refer to "PC application help for Subaru Select Monitor".
- For details concerning DTCs, refer to "List of Diagnostic Trouble Code (DTC)". < Refer to LIST OF DIAGNOSTIC TROUBLE CODE (DTC) . >
- Up to 3 DTCs are displayed in the order of detection.
- If a particular DTC is not stored in memory properly at the occurrence of problem (due to a drop in VDCCM&H/U power supply etc.), the DTC suffixed with a question mark "?" is displayed on Subaru Select Monitor display screen. This shows it may be an unreliable reading.
| Display | Contents to be displayed |
|---|---|
| (Current) | The current DTC is displayed on Subaru Select Monitor display screen. |
| (Old) | The latest DTC from the history of previous problems is displayed on Subaru Select Monitor display screen. |
| (Older) | The second latest DTC from the history of previous problems is displayed on the Subaru Select Monitor display screen. |
| (Before 3) | The third latest DTC from the history of previous problems is displayed on Subaru Select Monitor display screen. |