Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Subaru >> 2013 >> BRZ Premium, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 32 (Wireless Door Lock Control System (Service Information)) >> Door Control Transmitter (Without Smart Entry) >> Removal

Door Control Transmitter (Without Smart Entry): Removal

WARNING: This page is about a different car, the 2018 Subaru BRZ. However, it is still accessible from the selected car via links, so may be relevant.
  1. Removal of transmitter housing cover
    1. Using a flat tip screwdriver wrapped with protective tape, remove the transmitter housing cover.
      G12589214Courtesy of SUBARU OF AMERICA, INC.
      CAUTION: Do not pry the cover excessively.
    G12589215Courtesy of SUBARU OF AMERICA, INC.
  2. Removal of door control transmitter module set
    1. Remove the door control transmitter module set from the transmitter housing case.
  3. Removal of door control transmitter gasket
    1. Remove the door control transmitter gasket
  4. Removal of transmitter battery (Refer to TRANSMITTER BATTERY (WITHOUT SMART ENTRY) )
scientia non olet · About Mike's Workshop Manuals