Rear View Camera Assy: Inspection

WARNING: This page is about a different car, the 2019 Subaru BRZ. However, it is still accessible from the selected car via links, so may be relevant.

Application of target point marking
1. Park the vehicle on a level surface with ample space to work behind the vehicle.
2. Apply tape that serves as the target point marking to the floor behind the vehicle.
NOTE: Use tape with a width of approx. 30 to 50 mm (1.18 to 1.97 in) and a bright color as the marking tape.

Courtesy of SUBARU OF AMERICA, INC.
Check of marker position
1. Check the marker position.
  1. Pull the parking brake lever.
  2. With the brake pedal depressed, move the select or gearshift lever to reverse. (c) Display the rear-view screen to check the target point position.
2. Check applicable items as required.
  1. The rear-view screen is not displayed.
    Check the connection status of the back sensor and rear view camera.
    - Inspection of radio function (Refer to INSPECTION OF RADIO FUNCTION )
    - Inspection of navigation function (Refer to INSPECTION OF NAVIGATION FUNCTION )
  2. The marker position is misaligned or not displayed.
    The rear view camera body or vehicle installation area may be deformed.
    
    Check the rear view camera and vehicle installation area and repair or replace as required.