Power Window Regulator Master Switch ASSY: Installation

WARNING: This page is about a different car, the 2018 Subaru BRZ. However, it is still accessible from the selected car via links, so may be relevant.

Installation of power window regulator master switch ASSY

Engage the 4 claws and install the power window regulator master switch ASSY to the front armrest base panel UPR LH.

Courtesy of SUBARU OF AMERICA, INC.

Installation of the power window regulator master switch ASSY W/front armrest base panel UPR LH (Refer to ASSEMBLY )
Installation of the front door trim board SUB-ASSY LH (Refer to ASSEMBLY )
Installation of the door armrest cover LH (Refer to ASSEMBLY )
Connection of the battery ground terminal
Standard value: T=6.0N.m {61kgf.cm} {4.4ft.lbf}
Settings when removing/installing battery terminals (Refer to SETTING PROCEDURES AT PARTS REPLACEMENT AND REMOVAL/INSTALLATION )