Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Subaru >> 2012 >> Outback R >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Fuel Injection Fuel Systems (H4SO)) >> Mass Air Flow and Intake Air Temperature Sensor >> Removal

Mass Air Flow and Intake Air Temperature Sensor: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Disconnect the ground cable from battery.
    Fig 1: Disconnecting Ground Cable From Battery
    G07909685Courtesy of SUBARU OF AMERICA, INC.
  2. Disconnect the connector from the mass air flow and intake air temperature sensor, and remove the mass air flow and intake air temperature sensor.
Fig 2: Locating Mass Air Flow Connector And Bolts
G06648309Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About Mike's Workshop Manuals