Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Subaru >> 2012 >> Outback R >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Fuel Injection Fuel Systems (H4SO)) >> Manifold Absolute Pressure Sensor >> Removal

Manifold Absolute Pressure Sensor: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Disconnect the ground cable from battery.
    Fig 1: Disconnecting Ground Cable From Battery
    G07909690Courtesy of SUBARU OF AMERICA, INC.
  2. Remove the air intake boot assembly. Refer to AIR INTAKE BOOT .
  3. Disconnect the connector from the manifold absolute pressure sensor and remove the manifold absolute pressure sensor from throttle body.
Fig 2: Locating Manifold Absolute Pressure Sensor Connector And Bolts
G06648314Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About Mike's Workshop Manuals