Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Subaru >> 2012 >> Outback R >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 11 (Starting/Charging Systems (H4SO)) >> Generator >> Inspection >> Stator Coil (2.5 L Model)

Stator Coil (2.5 L Model)

WARNING: This page is about a different variant/trim than selected.
  1. Inspect continuity between the stator coil lead wire terminals. If the resistance is 1 MΩ or more, replace the stator assembly.
    Fig 1: Inspecting Continuity Between Stator Coil Lead Wire Terminals
    G07910121Courtesy of SUBARU OF AMERICA, INC.
  2. Inspect the continuity between the stator coil stator core and lead wire terminals. If the resistance is 1 Ω or less, replace the stator assembly.
    Fig 2: Inspecting Continuity Between Stator Coil Stator Core And Lead Wire Terminals
    G07910122Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About Mike's Workshop Manuals