Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Subaru >> 2012 >> Outback Base, Standard Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Fuel Injection Fuel Systems (H6DO)) >> Throttle Body >> Inspection >> Throttle Sensor (Method With SUBARU Select Monitor)

Throttle Sensor (Method With SUBARU Select Monitor)

WARNING: This page is about a different variant/trim than selected.
  1. Turn the ignition switch to ON. (engine OFF)
  2. Read the throttle opening angle signal and voltage of throttle sensor using Subaru Select Monitor. Refer to READ CURRENT DATA FOR ENGINE (NORMAL MODE) Subaru Select Monitor.
    Throttle sensor Throttle opening angle signal Standard
    Main 0.0% Approx. 0.6 V
    100.0% Approx. 4.04 V
    Sub 0.0% Approx. 1.48 V
    100.0% Approx. 4.23 V
scientia non olet · About Mike's Workshop Manuals