Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Subaru >> 2012 >> Outback Base, Standard Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Fuel Injection Fuel Systems (H6DO)) >> Fuel Pump >> Inspection

Fuel Pump: Inspection

WARNING: This page is about a different variant/trim than selected.
  1. Check that the fuel pump has no deformation, cracks or other damages.
  2. Connect battery positive terminal to terminal No. 5 and battery ground terminal to terminal No. 6, and inspect the fuel pump operation.
WARNING:
  • Wipe off fuel completely.
  • Keep the battery as far apart from fuel pump as possible.
  • Do not run the fuel pump for a long time under non-load condition.
Fig 1: Connecting Battery Positive Terminal To Terminal No. 5 And Battery Ground Terminal To Terminal No. 6
G06344815Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About Mike's Workshop Manuals