Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Subaru >> 2012 >> Outback Base, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 51 (Fuel Injection Fuel Systems (H4DOTC)) >> Tumble Generator Valve Assembly >> Installation

Tumble Generator Valve Assembly: Installation

WARNING: This page is about a different car, the 2012 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.

Install in the reverse order of removal.

NOTE: Use a new gasket.

Tightening torque: 

8.3 N.m (0.8 kgf-m, 6.1 ft-lb) 

Fig 1: Locating Tumble Generator Valve Assembly Mounting Bolts
G06648805Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About Mike's Workshop Manuals