Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Subaru >> 2012 >> Outback Base, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 22 (Wiper System & Washer System) >> Rear Washer >> Removal

Rear Washer: Removal

WARNING: This page is about a different car, the 2011 Subaru Tribeca. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the rear gate upper trim. Refer to REMOVAL , Rear Gate Trim.
  2. Remove the washer hose from washer nozzle.
  3. Push the claw of the nozzle from the backside of rear gate panel with a flat tip screwdriver or equivalent, and remove the washer nozzle.
    Fig 1: Removing Washer Nozzle
    G05004175Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About Mike's Workshop Manuals