Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Subaru >> 2012 >> Outback Base, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 22 (Wiper System & Washer System) >> Front Washer Nozzle >> Removal

Front Washer Nozzle: Removal

WARNING: This page is about a different car, the 2011 Subaru Tribeca. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the front hood insulator. Refer to FRONT HOOD INSULATOR , REMOVAL, Front Hood.
  2. Hold the claw (A) of the washer nozzle towards the direction of the arrow, and remove the washer nozzle.
    Fig 1: Locating Front Washer Nozzle Claw
    G05671939Courtesy of SUBARU OF AMERICA, INC.
  3. Remove the washer hose from the washer nozzle.
scientia non olet · About Mike's Workshop Manuals