Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Subaru >> 2012 >> Outback Base, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 18 (Anti-Theft System - Immobilizer (Diagnostics)) >> Clear Memory Mode >> Operation >> Body Integrated Unit

Body Integrated Unit

WARNING: This page is about a different car, the 2011 Subaru Tribeca. However, it is still accessible from the selected car via links, so may be relevant.
  1. On the «Main Menu» display, select {Each System Check}.
  2. On the «System Selection Menu», select {Integ. Unit}.
  3. After {Integ. Unit} is displayed, select [OK].
  4. On the «Integ. unit mode», select {Clearing Memory}.
  5. When "Done" is displayed on the display screen, end the Subaru Select Monitor and turn the ignition switch to OFF.
    NOTE: For detailed operation procedure, refer to SUBARU SELECT MONITOR .
scientia non olet · About Mike's Workshop Manuals