Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Subaru >> 2012 >> Outback Base, Standard Trans >> Repair and Diagnosis >> Engine Mechanical >> Lubrication System >> Lubrication (H6DO) >> Oil Pressure Switch >> Removal

Oil Pressure Switch: Removal

  1. Disconnect the ground cable from battery.
  2. Lift up the vehicle.
  3. Remove the under cover. Refer to FRONT UNDER COVER .
  4. Drain the engine oil. Refer to , REPLACEMENT , Engine Oil.
  5. Disconnect the terminal from oil pressure switch.
    Fig 1: Identifying Oil Pressure Switch Terminals
    G06651556Courtesy of SUBARU OF AMERICA, INC.
  6. Remove the oil pressure switch.
    Fig 2: Identifying Oil Pressure Switch
    G06651557Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About Mike's Workshop Manuals