Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Subaru >> 2012 >> Outback Base, Standard Trans >> Repair and Diagnosis >> Accessories & Equipment >> Exterior Lights >> Lighting System >> Interior Light System >> Inspection >> Check Trunk Lid Latch Switch

Check Trunk Lid Latch Switch

  1. Disconnect the trunk lid latch switch connector.
  2. Measure the resistance between trunk lid latch switch terminals.

    Preparation tool: Circuit tester 

    Fig 1: Measuring Resistance Between Trunk Lid Latch Switch Terminals
    G06653418Courtesy of SUBARU OF AMERICA, INC.
    Terminal No. Inspection conditions Specification
    2 - 3 When trunk lid is opened Less than 1 Ω
    When trunk lid is closed 1 MΩ or more
  3. If the inspection result is not within the standard value, replace the trunk lid latch and actuator assembly.
scientia non olet · About Mike's Workshop Manuals