Third Seat: Assembly
WARNING: This page is about a different car, the 2011 Subaru Tribeca. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
- Be careful not to stain or damage the backrest cover during assembly.
- Always use new hog rings.
- Secure the hog ring using hog ring pliers.
- Install the hog rings to the specified points securely and make sure that no wrinkle or twisting on backrest cover.
- Assemble the seat cushion in the reverse order of disassembly.
- Assemble the backrest in the reverse order of disassembly.
- Assemble each inner belt assembly and each cover in the reverse order of removal.
Tightening torque:
Refer to "COMPONENT" of "General Description". Refer to COMPONENT , General Description.