Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Subaru >> 2012 >> Outback Base, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 44 (Seat System - Seats) >> Seat Heater System >> Installation

Seat Heater System: Installation

WARNING: This page is about a different car, the 2011 Subaru Tribeca. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: If the seat cushion cover is removed or replaced, make sure to perform occupant detection system adjustment after installing the seat. Refer to SUBARU SELECT MONITOR SYSTEM CALIBRATION (REZEROING), OPERATION, Subaru Select Monitor.

Failure to do so may prevent the passenger's airbag from operating properly. 

Install in the reverse order of removal.

scientia non olet · About Mike's Workshop Manuals