Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Subaru >> 2012 >> Legacy Base, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 39 (Tire Pressure Monitoring System (Diagnostics)) >> Subaru Select Monitor >> Operation >> Display Transmitter (Id)

Display Transmitter (Id)

WARNING: This page is about a different car, the 2011 Subaru Tribeca. However, it is still accessible from the selected car via links, so may be relevant.
  1. On the «Main Menu», select {Each System Check}.
  2. On the «System Selection Menu», select {Tire pressure monitor}.
  3. After the {Tire pressure monitor} is displayed, select [OK].
  4. On the «Tire pressure monitor diagnosis», select {Transmitter ID regist confirm}.
  5. Select the {Transmitter ID data monitor} to display the transmitter ID.
scientia non olet · About Mike's Workshop Manuals