Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Subaru >> 2012 >> Impreza Base, 4D Sedan, Automatic CVT Trans >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Fuel Injection System (H4DO) (Except WRX-STI) >> Oil Control Solenoid >> Removal >> Intake Side

Intake Side

  1. Disconnect the ground cable from battery.
    Fig 1: Connecting/Disconnecting Battery Ground Cable
    G08317298Courtesy of SUBARU OF AMERICA, INC.
  2. Remove the air intake duct. (RH side only) Refer to REMOVAL , Air Intake Duct.
  3. Remove the reservoir tank. (LH side only) Refer to REMOVAL , Reservoir Tank.
  4. Disconnect the connector (A) from the oil control solenoid, and remove the oil control solenoid from the chain cover.
    • RH side
      Fig 2: Locating Oil Control Solenoid Connector Mounting Bolts (RH Side)
      G08315399Courtesy of SUBARU OF AMERICA, INC.
    • LH side
      Fig 3: Locating Oil Control Solenoid Connector Mounting Bolts (LH Side)
      G08315400Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About Mike's Workshop Manuals