Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Subaru >> 2012 >> Forester X, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 2 (Automatic Transmission - Mechanism & Function (5AT)) >> Transmission Control Module (TCM) >> Shift Pattern Selection >> Various Indicators Illumination Control

Various Indicators Illumination Control

WARNING: This page does not describe the selected car, but rather 15 other vehicles, including the 2014 Subaru Tribeca, 2014 Subaru Outback, 2014 Subaru Legacy, 2013 Subaru Tribeca, and 2013 Subaru Outback. However, it is still accessible from the selected car via links, so may be relevant.

Illumination of indicators on the combination meter are controlled as shown below according to shift pattern change.

Condition Display
Arrow mark 7-segment
P, R, N range Δ
 
P, R, N
Normal D range Δ
 
D
Manual mode
Semi SPORT shift
Δ
 
1 - 5
Engine oil high temperature&engine high speed key Δ
 
-
At transmission failure (1)
 
-
(1) Δ and indicate illumination.

ATF high temperature is informed by illuminating "ATF TEMP".