Learning Control
WARNING: This page does not describe the selected car, but rather 15 other vehicles, including the 2014 Subaru Tribeca, 2014 Subaru Outback, 2014 Subaru Legacy, 2013 Subaru Tribeca, and 2013 Subaru Outback. However, it is still accessible from the selected car via links, so may be relevant.
- Transmission shifting hydraulic learning control
Online learning control performance has been improved to absorb variation from vehicle to vehicle and quality aging and to ensure constant high shifting quality.
Learning occurs at each normal shifting under certain conditions, and learned values are saved in the flash ROM. The learned values are not deleted even if power is turned to OFF (even if the battery ground terminal is disconnected).
- Initial learning
The system in which measured data of predetermined driving operations for learning is set to TCM as the initial value is employed to assure high shifting quality from immediately after completion of vehicle. This system does not require the memory box that has been located on the control valve, contributing to cost reduction.