Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Subaru >> 2011 >> Tribeca Limited >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Fuel Injection System (Fuel Systems) (H6DO - 3.6L DOHC) >> Engine Coolant Temperature Sensor >> Removal

Engine Coolant Temperature Sensor: Removal

  1. Remove the collector cover.
  2. Disconnect the ground cable from battery.
  3. Drain engine coolant. Refer to ENGINE COOLANT DRAINING OF ENGINE COOLANT, REPLACEMENT, Engine Coolant.
  4. Disconnect the connectors from the engine coolant temperature sensor.
    Fig 1: Locating Engine Coolant Temperature Sensor Connector
    G06651227Courtesy of SUBARU OF AMERICA, INC.
  5. Remove the engine coolant temperature sensor.
scientia non olet · About Mike's Workshop Manuals