Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Subaru >> 2011 >> Outback R >> Repair and Diagnosis >> External Pages >> Different car >> Section 73 (Fuel Injection Fuel Systems (H4SO)) >> Oil Temperature Sensor >> Removal

Oil Temperature Sensor: Removal

WARNING: This page is about a different car, the 2012 Subaru Outback and 2012 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the ground cable from battery.
    Fig 1: Disconnecting Ground Cable From Battery
    G07909704Courtesy of SUBARU OF AMERICA, INC.
  2. Remove the air intake boot assembly. Refer to AIR INTAKE BOOT .
  3. Disconnect the connector from oil temperature sensor.
  4. Remove the oil temperature sensor.
Fig 2: Locating Oil Temperature Sensor Connector
G06648328Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About Mike's Workshop Manuals