Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Subaru >> 2011 >> Outback R >> Repair and Diagnosis >> External Pages >> Different car >> Section 73 (Fuel Injection Fuel Systems (H4SO)) >> Manifold Absolute Pressure Sensor >> Installation

Manifold Absolute Pressure Sensor: Installation

WARNING: This page is about a different car, the 2012 Subaru Outback and 2012 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.

Install in the reverse order of removal.

NOTE: Use new O-rings.

Tightening torque: 

2 N.m (0.2 kgf-m, 1.5 ft-lb) 

scientia non olet · About Mike's Workshop Manuals