Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Subaru >> 2011 >> Outback R >> Repair and Diagnosis >> External Pages >> Different car >> Section 107 (Speed Control Systems (H4SO)) >> Accelerator Pedal >> Inspection >> Check Accelerator Pedal Sensor Area (Method With SUBARU Select Monitor)

Check Accelerator Pedal Sensor Area (Method With SUBARU Select Monitor)

WARNING: This page is about a different car, the 2012 Subaru Outback and 2012 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn the ignition switch to ON. (engine OFF)
  2. Read the accelerator pedal opening angle signal and voltage of accelerator pedal sensor using Subaru Select Monitor. Refer to SUBARU SELECT MONITOR . Refer to SUBARU SELECT MONITOR . Refer to SUBARU SELECT MONITOR .
Accelerator pedal sensor Accelerator pedal opening angle signal Standard
Main 0.0% 1 V
100.0% 3.5 V
Sub 0.0% 1 V
100.0% 3.5 V
scientia non olet · About Mike's Workshop Manuals