Inspection Of Switch Unit
WARNING: This page is about a different car, the 2012 Subaru Outback and 2012 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
- Operate the switches to check the continuity between terminals.
Switch position Terminal No. Specification Front OFF 3 and 12 Less than 1 Ω INT 3 and 12 Less than 1 Ω LO 3 and 4 Less than 1 Ω HI 4 and 13 Less than 1 Ω Washer ON 1 and 2 Less than 1 Ω REAR OFF 5 and 2
5 and 6
2 and 61 MΩ or more ON 2 and 6 Less than 1 Ω INT 2 and 7 Less than 1 Ω Washer ON 5 and 2
5 and 6
2 and 6Less than 1 Ω - Replace the switch if the inspection result is not within the standard value.