Engine Control Module (ECM): Removal

WARNING: This page is about a different variant/trim than selected.

Disconnect the ground cable from battery.

Fig 1: Disconnecting Ground Cable From Battery
Courtesy of SUBARU OF AMERICA, INC.
Remove the glove box lid assembly, glove box lower cover, instrument panel side cover LH and glove box back panel. Ref. to REMOVAL , Glove Box.
Remove the connectors from ECM.

Fig 2: Locating ECM Connectors
Courtesy of SUBARU OF AMERICA, INC.
Remove the ECM from vehicle.

Fig 3: Locating ECM Bracket Bolts
Courtesy of SUBARU OF AMERICA, INC.