Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Subaru >> 2010 >> Outback R >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Fuel Injection System - Fuel Injection (Fuel Systems) (H6DO - 3.6L DOHC) >> Oil Flow Control Solenoid Valve >> Inspection

Oil Flow Control Solenoid Valve: Inspection

  1. Check that the oil flow control solenoid valve has no deformation, cracks or other damages.
  2. Measure the resistance between oil flow control solenoid valve terminals.
    Fig 1: Measuring Resistance Between Oil Flow Control Solenoid Valve Terminals
    G06651284Courtesy of SUBARU OF AMERICA, INC.
    TERMINAL RESISTANCE REFERENCE CHART

    Terminal No. Standard
    1 and 2 7.4±0.5 Ω (when 20°C (68°F))
scientia non olet · About Mike's Workshop Manuals