Intake Manifold

Install in the reverse order of removal.
Tightening torque:

T1: 6.4 N.m (0.7 kgf-m, 4.7 ft-lb)

T2: 19 N.m (0.9 kgf-m, 14.0 ft-lb)

Fig 1: Intake Manifold Bolts With Torque Specification (1 Of 2)
Courtesy of SUBARU OF AMERICA, INC.

Fig 2: Intake Manifold Bolts With Torque Specification (2 Of 2)
Courtesy of SUBARU OF AMERICA, INC.

NOTE: Use a new gasket.

Tightening torque: 6.4 N.m (0.7 kgf-m, 4.7 ft-lb)

Fig 3: Locating Intake Manifold Bolts (1 Of 2)
Courtesy of SUBARU OF AMERICA, INC.

Fig 4: Locating Intake Manifold Bolts (2 Of 2)
Courtesy of SUBARU OF AMERICA, INC.

NOTE: Use a new gasket.

Tightening torque: 25 N.m (2.5 kgf-m, 18.4 ft-lb)

Fig 5: Locating Intake Manifold Protector Bolts RH
Courtesy of SUBARU OF AMERICA, INC.

Fig 6: Locating Intake Manifold Protector Bolts LH
Courtesy of SUBARU OF AMERICA, INC.

NOTE: Use a new gasket.

Tightening torque: 6.4 N.m (0.7 kgf-m, 4.7 ft-lb)

Fig 7: Locating Intake Manifold Protector Bolts
Courtesy of SUBARU OF AMERICA, INC.