Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Subaru >> 2009 >> Tribeca Base >> Repair and Diagnosis >> Transmission >> Transmission Control Systems >> A/T Control Systems >> AT Shift Lock Solenoid and "P" Range Switch >> Removal >> At Shift Lock Solenoid

At Shift Lock Solenoid

  1. Remove the console box. Ref. to REMOVAL , Console Box.
  2. Disconnect the connector.
  3. Remove the connector from the base plate using a flat-tip screwdriver.
    Fig 1: Identifying Base Assembly Connector
    G05031915Courtesy of SUBARU OF AMERICA, INC.
  4. Remove the AT shift lock solenoid.
    Fig 2: Identifying AT Shift Lock Solenoid
    G05031953Courtesy of SUBARU OF AMERICA, INC.
  5. Disconnect the terminal of AT shift lock solenoid from the connector, using a flat-tip screwdriver.
    Fig 3: Identifying AT Shift Lock Solenoid Connector Terminal
    G06342788Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About Mike's Workshop Manuals