Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Subaru >> 2009 >> Tribeca Base >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System - Anti-Lock Brake Control System - Vehicle Dynamics Control (VDC) >> Yaw Rate and G Sensor >> Removal

Yaw Rate and G Sensor: Removal

  1. Disconnect the ground cable from battery.
  2. Remove the console box. Ref. to CONSOLE BOX .
  3. Disconnect the connector from the yaw rate & lateral G sensor.
  4. Remove the yaw rate & lateral G sensor.
    CAUTION: Do not drop or bump the yaw rate & lateral G sensor.
    Fig 1: Locating Yaw Rate & Lateral G Sensor Fasteners
    G06343521Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About Mike's Workshop Manuals