Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Subaru >> 2009 >> Legacy R >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 12 (Fuel Injection System (H4SO)) >> Mass Air Flow and Intake Air Temperature Sensor >> Removal

Mass Air Flow and Intake Air Temperature Sensor: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Disconnect the ground cable from battery.
    Fig 1: Disconnecting Ground Cable From Battery
    G05019586Courtesy of SUBARU OF AMERICA, INC.
  2. Disconnect the connector from the mass air flow and intake air temperature sensor, and remove the mass air flow and intake air temperature sensor.
    Fig 2: Locating Mass Air Flow And Intake Air Temperature Sensor Screws
    G05016812Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About Mike's Workshop Manuals