Wastegate Control Solenoid Valve: Inspection

1. Measure the resistance between the boost control solenoid valve terminals.
   Fig 1: Measuring Resistance Between Boost Control Solenoid Valve Terminals

   Courtesy of SUBARU OF AMERICA, INC.
   RESISTANCE REFERENCE CHART
   
   

   Terminal No.	Standard
   1 and 2	28 ±2 Ω (20°C (68°F))

2. Check that air does not come out of (B) when blowing in (A).
   Fig 2: Checking Air Flow

   Courtesy of SUBARU OF AMERICA, INC.
3. Connect the terminal No. 1 to the battery positive terminal and the terminal No. 2 to the battery negative terminal. When supplying air to (A), check that air is discharged from (B).

Fig 3: Connecting Terminal No. 1 To Battery Positive Terminal And Terminal No. 2 To Battery Negative Terminal

Courtesy of SUBARU OF AMERICA, INC.