Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Subaru >> 2009 >> Forester XT >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 9 (Engine Intake System (H4SO)) >> Air Intake Chamber >> Removal

Air Intake Chamber: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Loosen the clamp (A) which connects air intake chamber to throttle body.
  2. Loosen the clamp (B) which connects intake boot to air intake chamber.
  3. Remove the bolt (C) which secures air intake chamber to the stay.
  4. Disconnect the connector (D).
    Fig 1: Identifying Air Intake Chamber Clamp And Bolts With Connector
    G04997537Courtesy of SUBARU OF AMERICA, INC.
  5. Disconnect the blow-by hoses, and then remove air intake chamber.
scientia non olet · About Mike's Workshop Manuals