Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Subaru >> 2009 >> Forester XT >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 11 (Engine Controls - Engine (Diagnostics) (H4SO)) >> Clear Memory Mode >> Operation >> SUBARU Select Monitor (Normal Mode)

SUBARU Select Monitor (Normal Mode)

WARNING: This page is about a different variant/trim than selected.
  1. On the «Main Menu» display screen, select the {Each System Check}.
  2. On the «System Selection Menu» display screen, select the {Engine Control System}.
  3. Click the [OK] button after the information of engine type has been displayed.
  4. On the «Engine Diagnosis» display screen, select the {Clear Memory}.
  5. When the "Clear Memory?" is shown on the screen, click the [Yes] button.
  6. When "Done" and "Turn ignition switch to OFF" is shown on the display screen, turn the ignition switch to OFF.
NOTE:
  • Initial diagnosis of electronic throttle control is performed after memory clearance. Therefore, start the engine 10 seconds or more after have turning the ignition switch to ON.
  • For detailed operation procedure, refer to the PC application help for Subaru Select Monitor.
scientia non olet · About Mike's Workshop Manuals