Section 3 (Starting System & Charging System (H4SO)): Generator: Installation

WARNING: This page is about a different car, the 2009 Subaru Impreza. However, it is still accessible from the selected car via links, so may be relevant.

Install in the reverse order of removal.

Tightening torque:

25 N.m (2.5 kgf-m, 18.4 ft-lb)

CAUTION: Check and adjust the front side belt tension. Refer to FRONT SIDE BELT , INSPECTION, V-belt. Refer to FRONT SIDE BELT , INSPECTION, V-belt.

Fig 1: Locating Generator Bolts

Courtesy of SUBARU OF AMERICA, INC.

Tightening torque:

13 N.m (1.3 kgf-m, 9.6 ft-lb)

Fig 2: Identifying V-Belt Covers Tightening Torque Bolts

Courtesy of SUBARU OF AMERICA, INC.

Tightening torque:

T1: 8.5 N.m (0.9 kgf-m, 6.3 ft-lb)

T2: 25 N.m (2.5 kgf-m, 18.4 ft-lb)

Fig 3: Locating Generator Tightening Torque Bolts

Courtesy of SUBARU OF AMERICA, INC.