Turbo Model
WARNING: This page is about a different car, the 2009 Subaru Impreza. However, it is still accessible from the selected car via links, so may be relevant.
TURBO MODEL SPECIFICATION CHART
| Item | Specification | ||
|---|---|---|---|
| Starter | Type | Reduction type | |
| Vehicle model | AT | ||
| Model | M000T20175 | ||
| Manufacturer | Mitsubishi Electric | ||
| Voltage and output | 12 V - 1.4 kW | ||
| Direction of rotation | Counterclockwise (when observed from pinion) | ||
| Number of pinion teeth | 9 | ||
| No-load characteristics | Voltage | 11 V | |
| Current | 90 A or less | ||
| Direction of rotation | 2,000 RPM or more | ||
| Load characteristics | Voltage | 7.7 V | |
| Current | 400 A | ||
| Torque | 16.7 N.m (1.7 kgf-m, 12.3 ft-lb) or more | ||
| Rotating speed | 710 RPM or more | ||
| Lock characteristics | Voltage | 3.5 V | |
| Current | 960 A or less | ||
| Torque | 31 N.m (3.2 kgf-m, 22.9 ft-lb) or more | ||
| Generator | Type | Rotating-field three-phase type, voltage regulator built-in type, with load response control system | |
| Model | A3TG0491 | ||
| Manufacturer | Mitsubishi Electric | ||
| Voltage and output | 12V - 110A | ||
| Polarity on ground side | Negative | ||
| Direction of rotation | Clockwise (when observed from pulley side) | ||
| Armature connection | 3-phase Y-type | ||
| Output current | 1,500 RPM - 50 A or more 2,500 RPM - 91 A or more 5,000 RPM - 105 A or more |
||
| Regulated voltage | 14.1 - 14.8 V [20°C(68°F)] | ||
| Battery | Type and capacity | 12 V - 52AH(75D23L) | |