Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Subaru >> 2009 >> Forester XT >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Exterior Lights >> Lighting System >> Auto Headlight Beam Leveler Control Module >> Installation

Auto Headlight Beam Leveler Control Module: Installation

Install in the reverse order of removal.

Tightening torque: 

7.5 N.m (0.76 kgf-m, 5.5 ft-lb) 

NOTE: Perform reinitialization if the auto head light leveler control module was removed. Refer to PROCEDURE , Auto Headlight Beam Leveler System .
scientia non olet · About Mike's Workshop Manuals