Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Subaru >> 2008 >> Outback Base, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 7 (Engine Intake System - Intake (Induction) (H4DOTC)) >> Intake Duct >> Removal

Intake Duct: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Remove the collector cover.
  2. Disconnect the ground cable from the battery.
    Fig 1: Disconnecting Ground Cable And Battery
    G05019586Courtesy of SUBARU OF AMERICA, INC.
  3. Remove the intake manifold. <Ref. to REMOVAL , Intake Manifold .>
  4. Remove the sensor, engine harness and fuel pipe attached to the intake manifold. <Ref. to DISASSEMBLY , Intake Manifold .>
  5. Remove the intake duct from intake manifold.
    Fig 2: Identifying Intake Duct And Intake Manifold
    G05340349Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About Mike's Workshop Manuals